SINGLE BLADE SAWING MACHINES

CODE NO. AEW-SBS

STANDARD EQUIPMENT & ACCESSORIES

The machine body is in a tank form and is made of Cast Iron ¼ h.p. 1440 rpm single phase 220 volts motor AC-50 cycle (We also supply 110V motors where required). There is an aluminum housing that contains the main shaft.

The main shaft holds the cutting blade in a specially provided washer and also holds the driven pulley. The shaft is loaded between two sealed bearings.

The machine is fixed with a coolant splashguard; the coolant is stored in the tank body. The machine comes fixed with outlet tap for the coolant. A calibration attachment to set the cutting width to a particular size is supplied with the machine. The cutting blades are not provided with the machine.

The machine is supplied with light arrangement and belt protection guard.

 OPERATIONAL DETAILS

 The Gemstone is held in hand and is brought nearer the blade for cutting. The motor rotates the Blade and the operator does all other operations manually.

This machine can be best used for cutting rough stones with the help of 4” dia to 6” dia cutting blades. It can also be used for cutting thin slices of uniform size by using the calibration attachment provided with the machine.

The r.p.m. of the cutting blade can be adjusted between approx. 700 to 2800 with the help of step pulleys provided with the machine.

Back