MULTIPLE BLADE SAWING MACHINES

CODE NO. AEW-MBS

 STANDARD EQUIPMENT & ACCESSORIES

The Machine Base is mounted on a steel angle frame, the Cross-Slides to control the Horizontal and vertical movements of the work piece are made in Cast Iron.

Bearing Housing that houses one end of the Rotating shaft, Step Pulleys and Belt. The other end of the shaft is connected to a bearing loaded revolving centre. Main Shaft for holding Sawing Blades of upto 5-inch diameter. Shaft size is made to as per the bore size of the cutting blades.

The main shaft can take upto 60 Sawing Blades depending on the size of distance pieces required and the thickness of the cutting blades used.

Coolant Pipes are provided. Coolant splash-guards are provided. One – 1.0 H.P. Motor, 1440 rpm, 220 volts-single-phase AC-50 cycle comes with the machine. The Leads and connections are provided for the motor.

One Base plate, which can be rotated by 90 degrees, is provided with the machine for fixing of work pieces. The machine is supplied with one set of steel washers to support the cutting blades and the distance pieces.

OPERATIONAL DETAILS

Rough Stones are fixed on to the base plate with the help of quick fixing adhesive glues or wax. The Base plate is attached to main machine. The main shaft is loaded with the required cutting blades separated by distance pieces of the required sizes. The main shaft is fixed to the revolving centre. The motor and coolant pump are operated. The vertical and horizontal slides of the machine are set to just close to where the actual cutting will start.

The horizontal slide is moved manually or through the attached tiny motor to achieve the horizontal cut. The base plate is rotated to 90 degrees. The horizontal slide is once again moved to achieve another horizontal cut.

This results in small cubical sticks of the required size of the stone. These cubical sticks can be re-fixed to achieve one more cut, which will result in cubes being formed. These cubes can be further cut to get triangular shapes if required. Alternatively, the cubical strips can be taken on to a Single Blade Slicing Machine to cut them into the required cubes or triangles.

MAJOR ADVANTAGES 

1. Ideal Machine for uniform and bulk production of Slices, Cubes or Triangles. Most suited for mass production of synthetics or low priced stones.

OPTIONAL ACCESSORIES 

Spacers or distance pieces to be inserted between the cutting blades. The sizes have to be specified by the purchaser; these come in different sizes ranging from 2, 2.5, 3, 3.5, 4, 4.5 upto 8 mm.

One extra set of shaft and supporting washers should be ordered with the machine. This is required to enhance the productivity of the machine, as the cutters can be kept loaded for the next Operation.

Two extra base plates for fixing the work pieces. These are also required to enhance the efficiency, as the rough stones can be kept ready for operation.

The Coolant pump and coolant tank should be arranged locally.

All specifications are subject to change without notice